TM 9-2320-366-20-5
Change 2
17-7
17-4.
M1084/M1086 HOOK BLOCK AND CABLE ASSEMBLY REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Inspection
d.
Assembly
e.
Installation
f.
Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
MHC erected over cargo bed (TM 9-2320-366-10-1).
Engine shut down (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Socket, Socket Wrench (Item 70, Appendix B)
Cutter, Bolt (Item 16, Appendix B)
Gloves, Welders (Item 14, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Gloves, Rubber (Item 13, Appendix C)
Apron, Rubber (Item 3, Appendix C)
Weight, 200-250 lbs (91-113 kgs)
Materials/Parts
Solvent, Dry Cleaning (Item 65, Appendix D)
Wire, Nonelectrical (Item 72, Appendix D)
Pin, Cotter (Item 232, Appendix G)
Pin, Cotter (Item 227, Appendix G)
Nut, Self-Locking (Item 140, Appendix G)
Nut, Self-Locking (Item 174, Appendix G)
Clamp, Wire Rope, Saddled (Item 9.1,
Appendix
G)
References
FM 5-125
TB 43-0142
a. Removal.
(1)
Remove cotter pin (1) from nut (2).
Discard cotter
pin.
(2)
Remove nut (2), washer (3), hook block (4), washer
(5), and screw (6) from wedge socket (7).
WARNING
Cable can become frayed or contain
broken wires.
Wear heavy leather-palmed
gloves when handling cable.
Frayed or
broken wires can injure hands.
Failure to
comply may result in injury to personnel.