TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 444 of 1158

TM 9-2320-366-20-5

20-43. 200 AMP ALTERNATOR KIT INSTALLATION (CONT)

(4) Remove terminal lug TL6 (6) from dust boot (7).

NOTE

Retain 24 vdc and 12 vdc cable assemblies

for future installation.

(5) Remove three screws (8), washers (9), clamps (10), 24

vdc cable (11), and 12 vdc cable (12) from air inlet

manifold (13).

(6) Remove three clamps (10) from 24 vdc cable (11) and

12 vdc cable (12).

(7) Remove self-locking nut (14) and washer (15) from

alternator (16).

CAUTION

Ensure pulley does not contact wires,

terminal lugs, or terminal screws on front

of alternator. Failure to comply may result

in damage to equipment.

(8) Position pulley (17) on alternator (16) with washer (15)

and self-locking nut (14).

(9) Position pulley (17) in vise.

(10) Tighten self-locking nut (14) to 106-130 lb-ft (144-176

N·m).

(11) Remove pulley (17) from vise.

20-228

Change 1