TM 9-2320-366-20-5
20-538
Change 2
20-82.
DIGITIZATION KIT RADIO RACK ASSEMBLY REPLACEMENT/REPAIR (CONT)
(7)
Position three washers (8) and screws (9) in outer
side support (10) with three self-locking nuts (11).
(8)
Apply sealant to threads of two screws (12 and 13).
(9)
Position two washers (14) and screws (12) in lower
rear support (15).
(10) Position two washers (16) and screws (13) in upper
rear support (17).
WARNING
CAUTION
Adhesives,
solvents,
and
sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets
on
skin
or
clothing,
wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
Add spacers behind support to vehicles
equipped with rear panels. Failure to
comply may result in damage to
equipment.