TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 626 of 1434

TM 9-2320-366-34-2

10-58

Change 2

10-8.

REAR AXLE DIFFERENTIAL PINION SEAL, YOKE SEAL AND DRIVE YOKE

REPLACEMENT (CONT)

(9.1)Tighten four screws (11) to 26-35 lb-ft (35-47 N•m).

(9.2)Fold tabs on four screws (11).

(10) Apply lubrication to grease fittings (TM 9-2320-366-

20).

c. Follow-On Maintenance.

(1)

Check differential oil level (TM 9-2320-366-20).

(1.1) Lubricate drive shaft universal joint and slip yoke

(TM 9-2320-366-20-1).

(2)

Operate vehicle and check for proper operation

(TM 9-2320-366-10-1).

(3)

Shut down engine (TM 9-2320-366-10-1).

(4)

Check pinion seal for oil leaks.

End of Task.

CAUTION

Grease must flow from all four seals.

Failure to comply may result in damage to

equipment.

NOTE

Perform the following two steps on bearing

cups equipped with tabs.