TM-9-2320-366-34-2
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4
AUGUST 2005
CHANGE 2
TM-9-2320-366-34-2 - Page 631 of 1434
TM 9-2320-366-34-2
Change 2
10-61
(8.1)Tighten four screws (11) to 26-35 lb-ft (35-47 N•m).
(9) Position universal joint (8) on drive yoke (9) with
two
bearing cups (10) and four screws (11).
(10) Tighten four screws (11).
(10.1)Tighten four screws (11) to 26-35 lb-ft (35-47 N•m).
(10.2) Fold tabs on four screws (11).
(11) Apply lubrication to grease fittings (TM 9-2320-366-20).
CAUTION
NOTE
•
Perform step (10) on kits equipped with
shearhead screws.
•
Alternately tighten screws.
•
When correct torque is reached, bearing
cap screw small hex head will break off.
NOTE
•
There are two type of bearing cups, those
with tabs and those without.
Perform step
(8.1) on bearing cups not equipped with
tabs.
•
Perform step (8.1) on kits equipped with
screws P/N C5 H5-24-39.
NOTE
Perform steps (10.1) and (10.2) on bearing
cups equipped with tabs.
Grease must flow from all four seals.
Failure to comply may result in damage to
equipment.
Back to Top
