TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 725 of 1434

TM 9-2320-366-34-2

13-10. M1093/M1094 ANGLE BRACKET REPLACEMENT

This task covers:

a. LH Removal

b. LH Installation

c. RH Removal

d. RH Installation

e. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Air dryer removed (LH side) (TM 9-2320-366-20-5).

Muffler and heat shield removed (RH side) (TM 9

2320-366-20-3).

Tools and Special Tools

Tool Kit, Genl Mech (Item 78, Appendix B)

Goggles, Industrial (Item 28, Appendix B)

Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)

Wrench Set, Socket (Item 84, Appendix B)

Wrench, Impact, Electric (Item 88, Appendix B)

Tools and Special Tools (Cont)

Socket Set, Impact (Item 58, Appendix B)

Materials/Parts

Bolt (6) (Item 7, Appendix F) (LH side)

Nut, Self-locking (6) (Item 211, Appendix F) (LH

side)

Bolt (4) (Item 7, Appendix F) RH side)

Nut, Self-locking (4) (Item 211, Appendix F) (RH

side)

Personnel Required

(2)

WARNING

Wear appropriate eye protection when

working

under

vehicle

due

to

the

possibility of falling debris.

Failure to

comply may result in injury to personnel.

a. LH Removal.

CAUTION

When removing bolts, continuous removal of

collars is mandatory. Failure to comply will

result in seizing of collar to bolt.

NOTE

Step (1) requires the aid of an assistant.

Remove six collars (1), bolts (2), and angle bracket (3)

from frame rail (4). Discard collars and bolts.

13-67