TM-9-2320-366-34-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 3 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-3 - Page 572 of 1178

TM 9-2320-366-34-3

16-60. M1089 TWO WAY SOLENOID VALVE REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Batteries disconnected (TM 9-2320-366-20-3).

Hydraulic reservoir supply valve and return valve

closed (TM 9-2320-366-10-2).

Tools and Special Tools

Tool Kit, Genl Mech (Item 78, Appendix B)

Pan, Drain (Item 43, Appendix B)

Materials/Parts

Cap and Plug Set (Item 17, Appendix C)

Lockwasher (2) (Item 138, Appendix F)

Packing, Preformed (2) (Item 231, Appendix F)

Packing, Preformed (2) (Item 237, Appendix F)

Dispenser, Pressure Sensitive Adhesive Tape (Item

30, Appendix C)

Sealing Compound (Item 75, Appendix C)

a. Removal.

(1) Disconnect electrical connector (1) from two way

solenoid valve (2).

(2) Place drain pan under two way solenoid valve (2).

CAUTION

Cap

or

plug

hydraulic

connections

and

connection points to prevent contamination of

hydraulic system. Failure to comply may result

in damage to equipment.

NOTE

Tag hydraulic tubes and connection points

prior to disconnecting.

(3) Disconnect hydraulic tubes (3 and 4) from two way

solenoid valve (2).

16-336