TM 9-2320-366-34-4
Change 2
19-5
(17.1) Position two spacers (20.1), washers (21) and
screws (22) in seat mount (20).
(18)
Tighten two screws (16) to 71-89 lb-in. (8-10 N•m).
(18.1) Tighten two screws (19 and 22) to 14-18 lb-ft
(19-25 N•m).
(19) Install two support brackets (23) on lower platform
legs (24) with straight pins (25).
(20) Install four cotter pins (26) in two straight pins (25).
NOTE
•
Perform step (17.1) on vehicles with cab
S/N 12076G or higher.
Cab S/N located
on B Pillar.
•
When tightening screws, flat sides of
screws are to be in line with track sides.