TM 9-2320-366-34-4
Change 2
18-107
c.
Front Leaf Spring Resilient Mount Removal.
(1)
Install c-clamp on leaf spring (1).
(2)
Remove bolt (2), resilient mount (3), and spacer (4)
from plate (5).
Discard bolt, mount, and spacer.
d.
Front Leaf Spring Resilient Mount Installation.
(1)
Install C-clamp on leaf spring (1).
(2)
Install bolt (2) on leaf spring (1) with self-locking nut
(3).
(3)
Tighten self-locking nut (3) to 69-79 lb-ft (90-110
N•m).
(4)
Position plate (4) on leaf spring (1) with plate aligned
with matchmarks.
(5) Position two U-bolts (5) on plate (4) with four washers
(6) and self-locking nuts (7).
(6)
Tighten four self-locking nuts (7) to 200 lb-ft (271
N•m)
in sequence shown.
WARNING
NOTE
Use bolt P/N 12422628-002 on vehicles
equipped with three leaf springs.
Use bolt
P/N 12422628-001 on vehicles equipped
Frame rails approximately 350 lbs (159
kgs).
Attach a suitable lifting device prior
to installation.
Failure to comply may
result in injury to personnel or damage to
equipment.