TM 9-2320-366-34-4
Change 2
18-101
(
155) Install terminal lug TL25 (188) on dashboard
(174) with screw (189).
(156) Install terminal lug TL19 (190) on dashboard
(174) with screw (191).
(157)
Remove terminal lug TL22 ring terminal (192)
from NEW digitization power cable and strip
insulation 5/16 in. (8 mm).
(158)
Install terminal lug TL22 spade terminal (193) on
New digitization power cable.
(159)
Remove terminal lug TL22, ring terminal (192)
from NEW digitization power cable and strip
insulation 5/16 in. (8 mm).
(160)
Install terminal lug TL22, spade terminal (194) on
NEW digitization power cable and existing wire
J117.
NOTE
Perform steps (157) and (158) if replacing
the digitization power cable on vehicle serial
numbers 00001 through 11347 equipped with
WTEC II controller.
NOTE
Perform steps (159) and (160) if replacing
the digitization power cable on vehicle serial
numbers 00001 through 11347 equipped with
WTEC III controller.