TM-9-2320-366-34-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 4 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-4 - Page 148 of 796

TM 9-2320-366-34-4

18-94

Change 2

18-7.

DIGITIZATION KIT INITIAL INSTALLATION (CONT)

(108) Position washers (126) between bottom rear wall

brace (91) and rivnuts as required.

(109) Apply sealant to threads of two screws (127).

(110) Position two washers (128) and screws (127) in

bottom rear wall brace (91).

(111) Tighten two screws (127) to 70-80 lb-in (8-9 N•m).

(112)

Position washers (129) between outer side

support (87) and rivnuts (6) as required.

(113)

Apply sealant to threads of three screws (130).

(114)

Position three washers (131) and screws (130) in

outer side support (87).

(115)

Tighten three screws (130) to 70-80 lb-in (8-9

N•m).

(116)

Tighten three self-locking nuts (90) to 110-120

lb-in (12-14 N•m).

CAUTION

WARNING

CAUTION

Add spacers behind supports on vehicle side

panel.

Failure to comply may result in

damage to equipment.

Add spacers behind supports on vehicles

equipped with rear panels.

Failure to comply

may result in damage to equipment.

Adhesives,

solvents,

and

sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing.

Keep away from open fire

and use in a well-ventilated area.

If

adhesive, solvent, or sealing compound

gets

on

skin

or

clothing,

wash

immediately with soap and water.

Failure

to comply may result in injury to

personnel.