TM-9-2320-386-24-1-1
2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2
MAY 2001
TM-9-2320-386-24-1-1 - Page 1020 of 1078
TM 9-2320-386-24-1-1
0286 00
SPEEDOMETER REPLACEMENT (Contd)
0286 00-2
NOTE
Appropriate locking hardware is provisioned with gauge.
REMOVAL
1.
Turn four lockstuds (2) 1/4-turn to left and pull instrument mounting panel (3) away from
instrument panel (1).
2.
Disconnect speedometer driveshaft (4) from speedometer (5).
3.
Remove two nuts (9), lockwashers (8), wire harness (6), bracket (7), and speedometer (5) from
instrument mounting panel (3).
INSTALLATION
1.
Install speedometer (5), bracket (7), and wire harness (6) on instrument mounting panel (3) with
two lockwashers (8) and nuts (9).
2.
Connect speedometer driveshaft (4) to speedometer (5).
3.
Position instrument mounting panel (3) on instrument panel (1) and install by turning four
lockstuds (2) 1/4-turn to right.
4.
Connect battery ground cable (WP 0121 00).
5.
Start engine (TM 9-2320-386-10) and road test vehicle to check speedometer for proper operation.
Back to Top
