TM-9-2320-386-24-1-1

2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2

MAY 2001

TM-9-2320-386-24-1-1 - Page 1023 of 1078

REMOVAL

1.

Remove speedometer driveshaft (7) from driveshaft adapter (8).

2.

Remove signal generator (1) from driveshaft adapter (8).

3.

Remove sleeve and seal assembly (3) from driveshaft adapter (8).

4.

Remove sleeve and seal assembly (3) from port (6) on transfer case (5).

5.

Remove drive adapter (4) from sleeve and seal assembly (3).

6.

Remove lube fitting (2) from driveshaft adapter (8).

INSTALLATION

1.

Apply sealant to male threads of lube fitting (2).

2.

Install lube fitting (2) on driveshaft adapter (8).

3.

Install drive adapter (4) in sleeve and seal assembly (3)

4.

Install sleeve and seal assembly (3) in port (6) on transfer case (5).

5.

Install driveshaft adapter (8) to sleeve and seal assembly (3).

6.

Install signal generator (1) on driveshaft adapter (8).

7.

Install speedometer driveshaft (7) to driveshaft adapter (8).

8.

Lubricate fitting (WP 0023 00).

9.

Connect battery ground cable (WP 0121 00).

1

8

2

4

6

7

3

5

TM 9-2320-386-24-1-1

0287 00

SPEEDOMETER DRIVESHAFT ADAPTER REPLACEMENT (Contd)

0287 00-2

END OF WORK PACKAGE