TM-9-2320-386-24-1-1

2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2

MAY 2001

TM-9-2320-386-24-1-1 - Page 199 of 1078

4

5

9

10

8

2

1

7

6

3

REMOVAL

NOTE

Have drainage container ready to catch any excess oil.

1.

Remove dipstick (1) from dipstick tube (8).

2.

Remove locknut (5), washer (4), screw (10), washer (9), clamp (2), and dipstick tube (8) from

stabilizer bracket (3). Discard locknut (5).

3.

Loosen jamnut (7) and remove dipstick tube (8) from hole on cylinder block (6).

INSTALLATION

1.

Install dipstick tube (8) in hole on cylinder block (6) and tighten jamnut (7).

2.

Install clamp (2) and dipstick tube (8) on stabilizer bracket (3) with washer (9), screw (10),

washer (4), and new locknut (5).

3.

Install dipstick (1) into dipstick tube (8).

4.

Start engine (TM 9-2320-386-10) and check for leaks.

TM 9-2320-386-24-1-1

0030 00

ENGINE OIL DIPSTICK AND TUBE REPLACEMENT (Contd)

0030 00-2

END OF WORK PACKAGE