TM-9-2320-386-24-1-1

2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2

MAY 2001

TM-9-2320-386-24-1-1 - Page 203 of 1078

REMOVAL

NOTE

Have drainage container ready to catch oil.

1.

Disconnect hose (1) from elbow (9) on oil manifold (4).

2.

Remove two screws (7), washers (6), oil manifold (4), and O-ring (3) from engine (2). Discard

O-ring (3).

DISASSEMBLY

1.

Remove pipe plug (5) from oil manifold (4).

2.

Remove elbow (9) and O-ring (8) from oil manifold (4). Discard O-ring (8).

ASSEMBLY

1.

Install new O-ring (8) and elbow (9) on oil manifold (4).

2.

Install pipe plug (5) on oil manifold (4).

INSTALLATION

1.

Install new O-ring (3) and oil manifold (4) on engine (2) with two washers (6) and screws (7).

2.

Connect hose (1) to elbow (9) on oil manifold (4).

3.

Install front winch hydraulic pump (for vehicles equipped with winch) (WP 0222 00).

4.

Check oil level (TM 9-2320-386-10). Start engine and check for oil leaks.

1

2

5

4

3

9

8

7

6

TM 9-2320-386-24-1-1

0032 00

ENGINE OIL MANIFOLD MAINTENANCE (Contd)

0032 00-2

END OF WORK PACKAGE