TM-9-2320-386-24-1-1

2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2

MAY 2001

TM-9-2320-386-24-1-1 - Page 201 of 1078

4

3

5

7

8

9

10

3

11

12

14

2

13

1

6

REMOVAL

1.

Remove cap (1) from filler tube (14).

2.

Remove locknut (4), washer (3), screw (10), washer (3), two clamps (13), fuel hoses (11) and (12),

and dipstick tube standoff bracket (2) from stabilizer bracket (5). Discard locknut (4).

3.

Remove two screws (9), washers (8), filler tube (14), and gasket (7) from side cover (6). Discard

gasket (7).

INSTALLATION

1.

Install new gasket (7) and filler tube (14) on side cover (6) with two washers (8) and screws (9).

2.

Install dipstick tube standoff bracket (2) and fuel hoses (11) and (12) with two clamps (13) on

stabilizer bracket (5) with two washers (3), screw (10), and new locknut (4).

3.

Install cap (1) on filler tube (14).

4.

Start engine (TM 9-2320-386-10) and check for leaks.

TM 9-2320-386-24-1-1

0031 00

ENGINE OIL FILLER TUBE REPLACEMENT (Contd)

0031 00-2

END OF WORK PACKAGE