TM-9-2320-387-10

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

OPERATOR’S MANUAL

OCTOBER 2001

CHANGE 1

TM-9-2320-387-10 - Page 174 of 277

TM 9-2320-387-10

2-126

c. Removal of Cab Roof Cover, Rails, and Bow Assembly.

(1)

Unfasten eyelets (7) from turnbuttons (15) on horizontal rails (14), and

unfasten hook and loop attachments (9) securing cab roof cover (10) to bow assembly (8).

(2)

Remove cab roof cover (10) from horizontal rails (14).

(3)

Unfasten eyelets (11) from turnbuttons (12) on B-pillar (13) and

A-pillar (18).

2-54.

REMOVAL AND INSTALLATION OF TWO-MAN CREW AREA

SOFT TOP ENCLOSURE

NOTE

• For ease of installation, soft top components should be installed

when temperature is above 72°F (22°C).

• To keep hinge screws tight, lockwasher NSN 5310-00-527-3634 and

locknut NSN 5310-00-241-6658 can be used for installation of soft

top doors.

• To prevent seams from leaking, coat with adhesive as needed

(appendix D, item 1).

a. General.

The two-man soft top enclosure consists of two soft doors, rear curtain,

cab roof cover, two rails, and bow assembly.

b. Removal of Soft Top Doors.

(1)

Open door (1) and detach door holding check strap (3) from mounting

plate (2).

(2)

Raise door (1) to remove hinge pins (5) from hinge brackets (4).

(3)

Remove door (1) from vehicle.