TM-9-2320-387-10

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

OPERATOR’S MANUAL

OCTOBER 2001

CHANGE 1

TM-9-2320-387-10 - Page 178 of 277

TM 9-2320-387-10

2-130

Change 1

g. Installation of Soft Top Doors.

(1)

Apply a small amount of seasonal grade OE/HDO oil to hinge pins (6), and

install door (1) by inserting hinge pins (6) into hinge brackets (5).

(2)

Install door holding check strap (3) on mounting plate (2).

CAUTION

If door is jammed, do not force shut. Excessive force may damage

door.

(3)

Close door (1). It may be necessary to adjust door hinges (5) or door latch

striker (4) to achieve a tight seal. If adjustment is necessary, notify unit maintenance.

NOTE

When lowering soft top door window, always fold window to inside of

vehicle and secure between door and door frame crossmember.

2-54. REMOVAL AND INSTALLATION OF TWO-MAN CREW AREA

SOFT TOP ENCLOSURE (Cont’d)

2-55. REMOVAL AND INSTALLATION OF S250 SHELTER CARRIER

REAR SUSPENSION TIEDOWN KIT

CAUTION

The M1113 shelter carriers are specifically designed to be operated

with the S250 shelter installed. The vehicles can be driven safely

without the shelter installed, or equivalent payload of 1,500 lb (681 kg),

for short distances (e.g., to and from maintenance or from the rail head

when being delivered), but this should not be done often or for long

distances. Driving for long distances without the shelter installed, or

equivalent payload of 1,500 lb (681 kg) evenly distributed in center of

cargo area, will cause damage to equipment.

1

5

3

2

4

6