TM-9-2320-387-10
TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113
OPERATOR’S MANUAL
OCTOBER 2001
CHANGE 1
TM-9-2320-387-10 - Page 184 of 277
TM 9-2320-387-10
3-1
CHAPTER 3
MAINTENANCE INSTRUCTIONS
Section I. LUBRICATION
3-1. LUBRICATION INSTRUCTIONS
3-2. GENERAL LUBRICATION INSTRUCTIONS
3-3. GENERAL LUBRICATING INSTRUCTIONS UNDER
UNUSUAL CONDITIONS
3-4. LUBRICATION FOR CONTINUED OPERATION
BELOW 0°F (-18°C)
a. Service Intervals.
Service intervals on the lubrication instructions are for
normal operation in moderate temperatures, humidity, and atmospheric conditions.
b. Application Points.
Wipe lubricating points and surrounding surfaces
before and after applying lubricant.
c. Reports and Records.
Report unsatisfactory performance of lubricant
or preserving materials on Product Quality Deficiency Report, SF 368, as stated in
para. 1-4.
a. Service Intervals.
Increase frequency of lubricating service intervals when
operating under abnormal conditions such as high or low temperatures, prolonged
high-speed driving, or extended cross-country operations. Such operations can
destroy lubricant’s protective qualities. More frequent lubricating service intervals
are necessary to maintain vehicle readiness when operating under abnormal
conditions. During inactive periods, with adequate preservation, service intervals
can be extended.
b. Changes in Lubricant Grades.
Lubricant grades change with weather
conditions. Refer to appendix G for lubricant grade changes.
c. Maintaining Lubricant Levels.
Lubricant levels must be checked as
specified in appendix G. Steps must be taken to replenish and maintain lubricant
levels.
Refer to FM 9-207, Operation and Maintenance of Ordnance Materiel in Cold
Weather (0°F to -65°F) (-18°C to -54°C), or appendix G.
Lubrication instructions are in appendix G of this manual. All lubrication
instructions are mandatory.
Back to Top
