TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 1092 of 1205

TM

9-2320-387-24-l

8-19. INTERMEDIATE STEERING SHAFT REPLACEMENT

This task covers:

a.

Removal

b.

Installation

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 11

Maintenance and repair shop equipment:

automotive (Appendix B, Item 2)

Materials/Parts

Two locknuts (Appendix G, Item 141)

Manual References

TM 9-2320-387-10

TM 9-2320-387-24P

Maintenance

Level

Unit

NOTE

Ensure front wheels are in straight-ahead position while removing

and installing intermediate steering shaft.

a. Removal

1.

Remove locknut (61, washer (51, capscrew (81, and washer (5) from intermediate steering shaft (4)

and steering gear (71. Discard locknut (6).

2.

Remove locknut (21, washer (31, capscrew (91, washer (3), and steering shaft (4) from steering column (11.

Discard locknut (21.

-1

1.

Install intermediate steering shaft (4) on steering gear (7) with washer (5), capscrew (81, washer (51,

and locknut (61. Tighten locknut (61 to 40-50 lb-ft (54-68 N*m).

2.

Install steering sh& (4) on steering column (1) with washer (31, capscrew (91, washer (31, and locknut

(2).

Tighten locknut (2) to 40-50 lb-ft (54-68 N-ml.

8-54