TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 1119 of 1205

TM

9-2320-387-24-l

L 9-5. RADIATOR FRONT MOUNT BRACKET REPLACEMENT

This task covers:

a.

Removal

b. Installation

INITIAL SETUP:

Tools

General mechanic’s

tool kit:

automotive

(Appendix B, Item 1)

hlaintentice

and repair shop equipment:

automotive

(Appendix B, Item 2)

Materials/Parts

Three locknuts (Appendix G, Item 121)

Manual References

TM 9-2320-387-24P

Equipment Condition

Headlight housing removed (para. 10-18).

hlaintenance

Level

Unit

r--~

a.

Removal

I

1.

Remove locknut (21, two washers (31, capscrew (111, washer (31, spacer (101, mount (41, and

radiator (1) from front mount bracket (9). Discard locknut (2).

2.

Remove two locknuts (121, washers (71, capscrews (61, washers (7), spacers (51, and bracket (9) from

front suspension crossmember

(8). Discard locknuts (12).

[I

1.

Install bracket (9) on front suspension

crossmember

(8) with two spacers (51, washers (71, cap-

screws (6), washers (71, and locknuts (12). Tighten locknuts (12) to 90 lb-ft (122 Nom).

2.

Instal .l mount (4) and radiator (1) on front mount bracket (9) with washer (3), spacer

screw

(II),

two washers (31, and locknut (2). Tighten locknut (2) to 30 lb-ft (41 N-m).

(101, cap-

0’

1

FOLLOW-ON

TASK

Install headlight housing (para. 10-18).

9-5