REFERENCE INFORMATION
.
.
.
tlae
1. Start engine.
2. Hold down brake pedal and
move transmission
shift lever thmugh afl ranges induding rowso.
-i
3.
Engage
parking brake
and place shift lever in
neutral. Check fluid bvel on dipstick.
4. Proper level is between FULL and ADD marks
on dipstick
Check fluid for
a
burnt smott, grit. discoloration.
air
bubbles, or
a
milky appearance.
l
Burnt smell, discoforation,
or gn’t indicates worn
or damaged
internal components.
Notify DS
maintenance
(chapter 14).
l
Bubbles indicate of an overfilled
system or air
leaks in the system. Drain the fluid and refill to
proper level (para. 5-2).
l
Milky appearance
is due to water in the system.
Replace fluid and fiiter.
If the speedometer
works but the vehicle doesn’t
move, the transmission
is OK and the problem is in
the final drive. Most likely the fault is in the splined
output shafts of the transfer case. Listen for unusual
I
noise.
TM 9-2320-387-24-l
DRIVETRAIN
\
DIPSTICK
MARKINGS
2-455