TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 506 of 1205

REFERENCE INFORMATION

TM 9-2320-387-24-l

DRIVETRAIN

Check

for tom boots

on the CV joints,

stripped

splines.

smooth

joint

operation,

and

proper

mounting torques.

Replace halfshafts and CV joints (para. 6-7).

Lubricate in accordance with TM Q-2320-387-10.

A[W

I

Check for smooth

operation

of U-joints,

stripped

splines,

bent

yokes,

or other

problems. Also check to see if the shaft

itself is bent. Replace propeller

shafts or

U-joints (paras. 6-2 through 6-5).

Lubricate in accordance with TM Q-2320-387-10.

CV J&NT

BOOT

GEAR:D

HUB

TRANSFER

CASE

OUTPUT YOKE

Make sure the geared hubs turn freely.

Check mounting hardware for proper

installation.

Lubricate in accordance with TM 9-2320-367-l

0.

Replace geared hubs (para. 6-Q).

PROPELLER

SHAFT

DlFFERENTtAL

INPUT

2-457