REFERENCE INFORMATION
Make sure the STEXE-R
is powered by a W5 cable.
If t&e TK mode test tells you that the vehicle has a fault,
return to the paragraph
you came from. If the vehicle
tests OK, continue here.
-
-I
You will have to decide if the DCA test result is wrong. If
the TK test gave a substantially
different result than the
DCA test. answer NO to this question.
NOTE
VEHICLE
DCA FAULTY. Use the STEACE-R
in the TK
mode for the rest of your testing.
See the chart on the foldout page for a way
to
run the rest of the DCA tests in the TK
mode. Have DS maintenance
repair the DCA
when you’re
finished
You can check the connections
at the shunt and the
power stud to see if they are OK. Look at the schematic
for help.
TM 9-2320-387-24-l
DCA TROUBLESHOOTING
2-485