TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 1005 of 1555

TM 9-2320-387-24-2

26-3.

9,000

LB WINCH

REPAIR (Cont’d)

23.

24.

25.

26.

Install plate (211, anchor (221, and three tie rods (241 on drum supports (2) and (19) with six

capscrews (20). Tighten capscrews (20) to 18 lb-R (24 N-m).

Install two springs (23) on anchors (22) and plate (21).

NOTE

If motor or control have been precoated with sealing compound,

remove compound from between motor case and control

mounting gear contact area. Failure to do so may cause

improper grounding of control.

Install clamp (27) on motor (13).

Install control pack (26) on motor (13) and tighten clamp (27).

26-9