TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 1006 of 1555

TM 9-2320-387-24-2

I---

26-3.

9,000

LB WINCH

REPAIR (Cont’d)

~--7

27.

Install three leads (3) on terminals (41 with nuts (2) and slide rubber boots (1) over nuts (2).

28.

Apply pipe sealant to threads of setscrew (5) and install on motor (6).

29.

Connect control connector (14) to motor connector (15).

30.

Install lead 6 (12) on control pack (13) with nut (11).

31.

Install lead 7 (7) and ground lead (8) on motor (61 with lockwasher (9) and capscrew (101.

32.

Using coating compound, coat motor end of winch (6) up to motor end drum support (18).

33.

Install motor control cover (17) and ground lead (81 on control pack (13) with three screws (16).

FOLLOW-ON TASKS:

l

Install winch (Ml1141 (para. 12-33).

l

Install winch (M1113) (para. 12-27).

l

Install winch cable (para. 12-28).

26-10