TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 1016 of 1555

TM

9-2320-387-24-2

27-3.

BODY WIRING HARNESS REPLACEMENT (Cont’d)

40.

41.

42.

Remove three capscrews (I), two nuts (41, washers (51, screws

(121,

washers (111, screws (91,

lockwashers (81, and washers (7) from bracket (10) and coverplate (2). Remove coverplate (2) from

battery box (6) and B-beam (3). Discard lockwashers (8).

Remove two capscrews (17) from coverplate (13) and B-beam (3).

Remove two capscrews (161, lockwashers (151, washers (141, and coverplate (13) from battery

box (6). Discard lockwashers (15).

43.

Remove two harness leads (18) from circuit breaker (19).

NOTE

Perform step 40 for Ml113 models only. Perform steps 41 and 42

for Ml114 models only.

27-10