TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 1126 of 1555

Change 1

28-75

28-19. TRANSMISSION ASSEMBLY FROM SUBASSEMBLIES

(Cont’d)

TM 9-2320-387-24-2

6.

Lower gear unit (3) into transmission case (6). Remove gear unit remover/installer.

7.

Install center support snapring (7) against center support (1) in second snapring groove. Beveled

side of snapring (7) must be in an upward position and snapring gap at nine o’clock position.

NOTE

Perform step 8 for 1997-1998 transmissions only.

8.

Install oil cooler fitting (6.1) in transmission case (6).

4

6.1

5

6

7

8

9

10

11

3

1

1

SLIDE HAMMER

GEAR UNIT

INSTALLER/

REMOVER

LOCATION OF

SNAPRING