TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 1131 of 1555

TM

9-2320-387-24-2

28-19. TRANSMISSION ASSEMBLY FROM SUBASSEMBLIES (Cont’d)

h. Fourth Clutch, Turbine Shaft, and Overdrive

Carrier Assembly

Installation

1.

Remove snapring (l), backing plate (2), four clutch plate assemblies (51, and clutch plates (3) from

fourth clutch housing (4).

2.

Install fourth clutch housing (4) on transmission case (61, aligning bolt hole in housing (4) with bolt

hole in case (6).

3.

Install bolt (7) on fourth clutch housing (4). Tighten bolt (7) to 13-17 lb-ft (18-23 Nom).

28-80