TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 1135 of 1555

TM 9-2320-387-24-2

28-19. TRANSMISSION ASSEMBLY FROM SUBASSEMBLIES (Cont’d)

I

1 k.

Front Servo

Installation

Install spring

(2) and

seated

on

spring

(2).

piston assembly (1) in transmission case (3), ensuring piston assembly

(

11)

is firmly

1. Band Apply Pin Check

1.

Place gauge pin in rear servo bore of transmission case (3) and rotate to side A.

2.

Place checking tool on servo bore with hex nut (5) facing parking paw1 side of transmission case (3).

3.

Secure checking tool to transmission case (3) with two servo cover screws (4). Tighten screws (4)

to 18 lb-R ( 24 Nom).

4.

Ensure gauge pin can move freely in checking tool.

5.

Apply 25 lb-R (34 Nom) of torque to hex-nut (5).

6.

Read

edge

of gauge pin that is even with checking tool edge at pin gauge. Record number and letter.

28-84