TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 1210 of 1555

TM

9-2320-387-24-2

I

31-3. STEERING GEAR REPAIR

(Cont’d)

I

NOTE

Keep bearing balls in alternating sequence when installing guide

in rack piston. Ensure a total of 24 bearing balls are used.

8.

Install eight remaining bearing balls (11) in guide (12) half and retain with grease.

9.

Assemble both guide (12) halves together and install guide (12) in guide holes (10).

10.

Install clamp (14) over guide (12) with two screw-assembled washers (13). Tighten screw-assembled

washers (13) to 4 lb-R 6 N-m).

11.

Rotate worm shaft (9) clockwise until flush with rack piston (8).

12.

Install rack piston arbor into rack piston (8) and hold firmly against worm shaft (9). Remove

worm

shaft (9).

7

I

1

RACK FIST-ON ARBOR

31-13