TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 1213 of 1555

TM 9-2320-387-24-2

31-3. STEERING GEAR REPAIR

(Cont’d)

26.

27.

28.

29.

Using spanner wrench, install adjuster plug (1) in housing (3). Do not tighten.

Install locknut (2) over adjuster plug (1). Do not tighten.

Install rack piston (4) and rack piston arbor into gear housing (3). Ensure gear teeth on rack

piston (4) align with gear teeth on pitman shaft (5).

Hold rack piston arbor tightly against rack piston (4) while turning stub shaft (6) clockwise. Remove

rack piston arbor.

30.

Install rack piston plug (7) into rack piston (4). Do not tighten.

31.

Center rack piston (4) and install pitman sh& (5) in housing (3).

32.

Tighten rack piston plug (71 to 75 lb-R (102 N-m).

SPANNER WRENCH

RACK PISTON ARBOR

31-16