TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 1214 of 1555

TM 9-2320-387-24-2

31-3. STEERING GEAR REPAIR (Cont’d)

33.

Install housing end plug O-ring seal (10) and housing end plug (9) in housing (3).

NOTE

Opening in retaining ring should be located approximately 1 in.

(25 mm) from access hole.

34.

Install retaining ring (8) in housing (3).

35.

Install side cover gasket (15) on side cover (13) by bending tabs (14) around side cover (13) edge.

36.

Install side cover (13) onto adjuster screw (16).

37.

Install four capscrews (12) on side cover (13). Tighten capscrews (12) to 40 lb-R (54 N-m).

38.

Install lash adjuster nut (11) on pitman shaft adjuster screw (16).

11

12

\T

i

+L’

I

0-’

I

l3

01

s

14

15

8

I

0

31-17