TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 1269 of 1555

33-12. LEFT REAR FLOOR PANEL REPAIR (Cont’d)

TM 9-2320-387-24-2

33-40

Change 1

NOTE

All dimensions are in inches. For metric conversion, see chart.

1.

Cut insert panel (1) from sheet metal as shown, and mark six reference lines (2) and directional

arrow (3) on insert panel (1).

2.

Locate, mark, and drill two 0.312-in. (7.925-mm) diameter holes through insert panel (1).

3.

Locate, mark, and drill a 1.000-in. (25.400-mm) diameter hole through insert panel (1).

4.

Fabricate two drain holes (4) in insert panel (1).

5.

Bend insert panel (1) 1.50-in. (38.10-mm).

6.

Remove all burrs and round all sharp edges on insert panel (1).

a. Left Rear Insert Panel Fabrication

METRIC CONVERSION

1.25 IN.

31.75 MM

3.00 IN.

76.20 MM

8.00 IN.

203.20 MM

16.50 IN.

419.10 MM

30.00 IN.

762.00 MM