TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 1271 of 1555

33-12. LEFT REAR FLOOR PANEL REPAIR (Cont’d)

TM 9-2320-387-24-2

33-42

Change 1

1.

Cut reinforcement strip (1) from sheet metal, and mark four reference lines (2), centerline (3), and

letter A on reinforcement strip (1).

2.

Locate, mark, and drill fourteen 0.187-in. (4.75-mm) diameter holes and one 0.750-in. (19.05-mm)

diameter hole through reinforcement strip A (1).

3.

Remove all burrs and round all sharp edges on reinforcement strip A (1).

b. Reinforcement Strips Fabrication

METRIC CONVERSION

0.125 IN.

3.175 MM

0.75 IN.

19.05 MM

1.50 IN.

38.10 MM

2.00 IN.

50.80 MM

3.00 IN.

76.20 MM

4.00 IN.

101.60 MM

8.00 IN.

203.20 MM

14.00 IN.

355.60 MM

DRILL 0.750-IN. (19.050-MM) DIAMETER HOLE

DRILL FOURTEEN 0.187-IN. (4.75-MM) DIAMETER HOLES