TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 1279 of 1555

33-12. LEFT REAR FLOOR PANEL REPAIR (Cont’d)

TM 9-2320-387-24-2

33-50

Change 1

1.

Position reinforcement strip A (2) on insert panel (1). Align reference lines (3) with edges of rein-

forcement strip A (2).

2.

Using reinforcement strip A (2) as a template, locate, mark, and drill fourteen 0.187-in. (4.75-mm)

diameter holes through insert panel (1). Remove reinforcement strip A (2).

3.

Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded surfaces of insert

panel (1) and reinforcement strip A (2).

4.

Position reinforcement strip A (2) on insert panel (1) and install with fourteen rivets (4).

5.

Remove any adhesive residue and clean edges on reinforcement strip A (2) and insert panel (1).

e. Reinforcement Strip A and Insert Panel Assembly

DRILL FOURTEEN 0.187-IN.

(4.75-MM) DIAMETER HOLES