TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 1273 of 1555

33-12. LEFT REAR FLOOR PANEL REPAIR (Cont’d)

TM 9-2320-387-24-2

33-44

Change 1

1.

Cut two metal strips (2) from sheet metal, and mark two reference lines (1), centerline (3), and

directional arrow (4). Identify two metal strips (2) as C and D.

2.

Locate, mark, and drill twenty-four 0.187-in. (4.75-mm) diameter holes through metal strips C

and D (2).

3.

Bend metal strips C and D (2) 1.50 in. (38.10-mm).

c. Metal Strips Fabrication

DRILL TWENTY-FOUR 0.187-IN.

(4.75-MM) DIAMETER HOLES

METRIC CONVERSION

0.60 IN.

15.24 MM

0.75 IN.

19.05 MM

1.25 IN.

31.75 MM

1.40 IN.

35.56 MM

1.50 IN.

38.10 MM

2.00 IN.

50.80 MM

2.50 IN.

63.50 MM

3.00 IN.

76.20 MM

8.50 IN.

215.90 MM

32.70 IN.

830.58 MM