TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 1307 of 1555

33-13. RIGHT FRONT FLOOR PANEL REPAIR (Cont’d)

TM 9-2320-387-24-2

33-78

Change 1

1.

Position metal strip C (2), with arrow facing up and toward metal strip A (5), on insert panel (1).

Align reference lines (4) of metal strip A (5) and C (2) and line (3) with edge of metal strip C (2).

2.

Using metal strip C (2) as a template, locate, mark, and drill eight 0.187-in. (4.75-mm) diameter

holes through insert panel (1).

3.

Apply approximately 0.125-in. (3.175-mm) thickness of adhesive sealant to shaded surface of insert

panel (1) and metal strip C (2).

4.

Position metal strip C (2) on insert panel (1) and install with eight rivets (6).

5.

Remove any adhesive residue and clean edges of metal strip C (2) and insert panel (1).

f. Metal Strip C and Insert Panel Assembly

DRILL EIGHT 0.187-IN.

(4.75-MM) DIAMETER

HOLES