TM-9-2320-387-24-2
TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2
DECEMBER 1997
CHANGE 1
TM-9-2320-387-24-2 - Page 274 of 1555
11-36.1. LEFT FRONT UNDERBODY ARMOR INSTALLATION (Cont’d)
TM 9-2320-387-24-2
11-68.10
Change 1
27.
Match-drill six 13/32-in. (10.3-mm) diameter holes from left front underbody armor (1) through
driver’s side footwell inner armor (right side (inner)).
28.
Match-drill six 13/32-in. (10.3-mm) diameter holes from left front underbody armor (1) through
driver’s side footwell outer armor (left side (outer)).
29.
Secure driver’s side footwell inner liner (10) to left front underbody armor (1) with capscrews
(4), (5), (7), (8), and (9), three spacers (3), spacers (6), and six locknuts (2). Tighten locknuts (2)
to 35 lb-ft (50 N
•
m).
30.
Secure driver’s side footwell outer liner (11) to left front underbody armor (1) with capscrews
(4), (5), (7), (8), and (9), three spacers (3), spacers (6), and six locknuts (2). Tighten locknuts (2)
to 35 lb-ft (50 N
•
m).
MATCH-DRILL 13/32 IN. (10.3 MM) DIAMETER
HOLES (6 PLACES)(INNER ARMOR)
MATCH-DRILL 13/32 IN. (10.3 MM) DIAMETER
HOLES (6 PLACES)(OUTER ARMOR)
RIGHT SIDE
(INNER)
LEFT SIDE
(OUTER)
1
Back to Top
