TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 315 of 1555

TM

9-2320-387-24-2

1 l-51. TURRET ARMOR BRUSH SEAL REPLACEMENT

This task covers:

a. Removal

INITIAL SETUP:

b. Installation

Applicable Models

Ml114

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Riveter tool kit (Appendix B, Item 123)

Materials/Parts

Twenty-eight rivets (Appendix G, Item 351)

RTV sealant (Appendix C, Item 74)

Manual References

TM 9-2320-387-24P

Equipment Condition

l

Turret pintle mount removed (para. 11-62).

l

Night vision lid bumper bracket removed

(para. 11-58).

Maintenance Level

Unit

1 a. Removal

1

NOTE

l

Note brush seals location for installation.

l

For replacement of rivets, refer to para. 10-56.

Remove twenty-eight rivets (1) and two brush seals (3) from turret armor (2).

b. Installation

1.

Apply a small amount of sealant to brush seal mount holes (4).

NOTE

Ensure two rivet holes are left open for night vision lid bumper

bracket.

2.

Position two brush seals (3) on turret armor (21 and install twenty-eight rivets (1) (leave two rivet

holes (5) open).

3.

Seal butt joints of brush seals (3) with sealant.

FOLLOW-ON TASKS:

l

Install turret pintle mount (para. 11-62).

l

Install night vision lid bumper bracket (para. 11-58).

1 I-102