TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 499 of 1555

TM 9-2320-387-24-2

12-42. FUEL TANK VENT STACK TUBE REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Applicable Models

Ml113

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Two lockwashers

(Appendix G, Item 229)

Manual References

TM 9-2320-387-10

TM 9-2320-387-24P

Equipment Condition

Hood raised and secured (TM 9-2320-387-10).

Maintenance Level

Unit

1

a. Removal

1

1.

Disconnect fuel tank vent line (8) from fuel tank vent stack tube (2).

2.

Remove nut (lo), screw (7), lockwasher

(91, and clamp (6) from fuel tank vent stack tube (2) and air

intake assembly (1). Discard lockwasher

(9).

3.

Remove screw (51, lockwasher (41, fuel tank vent stack tube (21, and clamp (3) from air intake

assembly (1). Discard lockwasher

(4).

b. Installation

1.

Install fuel tank vent stack tube (2) and clamp (3) on air intake assembly (1) with lockwasher

(4)

and screw (5).

2.

Install fuel tank vent stack tube (2) and clamp (6) on air intake assembly (1) with lockwasher

(91,

screw (7), and nut (10).

3.

Connect vent line (8) to vent stack tube (2).

FOLLOW-ON

TASK:

Lower and secure hood (TM 9-2320-387-10).

12-76