TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 504 of 1555

TM 9-2320-387-24-2

12-46. DEEP WATER FORDING SENSOR CUP REPLACEMENT

This task covers:

a.

Removal

b.

Installation

INITIAL

SETUP:

I

Applicable

Models

Manual References

Ml113

TM 9-2320-387-24P

Tools

General

mechanic’s

tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Two locknuts (Appendix G, Item 109)

Equipment

Condition

Engine access cover removed (para.

10-22).

Maintenance

Level

Unit

1.

Loosen clamp (3) and disconnect sensor cup vent line (2) from sensor cup (41.

2.

Remove two locknuts (11, washers (61, capscrews (51, washers (61, and sensor cup (41 from

body (7). Discard locknuts (1).

I]

I.

Install sensor cup (4) on body (7) with two washers (61, capscrews (51, washers (61, and locknuts (1).

Tighten locknuts (1) to 6 lb-ft (8 N-m).

2.

Connect sensor cup vent line (2) to sensor cup (4) with clamp (3).

FOLLOW-ON TASK:

Install engine access cover (para. 10-221.

12-81