TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 618 of 1555

TM 9-2320-387-24-2

1 S-27.

ENGINE PREPARATION

(Cont’d)

28.

Remove four capscrews (4) and right exhaust manifold heat shield (3) from exhaust manifold

(2)

and

cylinder head (1).

29.

Loosen locknut (9) and washer (8) on front of starter (7) and bracket (10).

WARNING

30.

31.

32.

Starter must be supported during removal. Failure to support

starter may cause injury to personnel or damage to equipment.

Remove two capscrews (111, washers (121, starter (71, and shim(s) (6);if present, from engine (5).

Remove three capscrews (151, lockwashers (141, and left and right engine mount and insulator

assemblies (13) from engine (5). Discard lockwashers (14).

Remove two nuts (171, lockwashers (161, and wiring harness bracket (18) from oil pan (19). Discard

lockwashers (16).

1586