TM-9-2320-387-24-2
TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2
DECEMBER 1997
CHANGE 1
TM-9-2320-387-24-2 - Page 615 of 1555
15-27. ENGINE PREPARATION (Cont’d)
Change 1
15-83
TM 9-2320-387-24-2
14
15
14
20
20.1
16
21
22
23
21
22
23
22
24
25
26
19
27
28
29
21
22
24
23.1
25
25
24
23
22
18
17
17
19
~
30
~
22
NOTE
Perform step 18 for M1114 vehicles only.
18.
Remove two nuts (18), lockwashers (17), capscrews (14), washer (20.1), lockwasher (17), A/C
compressor (20), and spacer (15) from mounting bracket (19) and bracket (16). Discard lockwashers
(7).
19.
Remove capscrew (30) and belt tensioner (29) from mounting bracket (19).
NOTE
On M1114 vehicles equipped with A/C, the compressor pulley is in
place of the lower idler pulley.
20.
Remove three nuts (25), lockwashers (24), washers (22), supports (23.1), capscrews (21),
washers (22), dust covers (22.1), and idler pulleys (23) from mounting bracket (19). Discard
lockwashers (24).
21.
Remove two capscrews (28) and lockwashers (27) from mounting bracket (19) and water pump (26).
Discard lockwashers (27).
21.1.
Remove screw (26.1), collar washer (25.1), and mounting bracket (19) from engine (25.2).
26.1
23.1
23.1
25.1
25.2
22.1
22.1
22.1
Back to Top
