TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 643 of 1555

TM 9-2320-387-24-2

1528.

ENGINE INSTALLATION

(Cont’d)

I

61.

62.

63.

64.

65.

66.

Install right rear heat shield (14) on right exhaust manifold heat shield (12) and rear heat

shield (2) with two screws (13).

NOTE

Remove plug prior to installation of transmission oil dipstick tube.

Install O-ring seal (16) on dipstick tube (11).

Install dipstick tube (11) into transmission (15).

Install dipstick tube (11) on manifold stud (9) with nut (8).

Install dipstick tube (11) on right rear heat shield (14) with washer (19), lockwasher (18), and

capscrew (17). Tighten capscrew (17) 25-37 lb-ft (34-50 Nom).

Install transmission oil dipstick (10) in dipstick tube (11).

15111