TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 748 of 1555

TM 9-2320-387-24-2

19-d. TRANSMISSION/TRANSFER

CASE ASSEMBLY INSTALLATION (Cont’d)

NOTE

Nuts

on mount must be loosened prior to installation of

crossmember on vehicle for proper alignment.

6.

Loosen two nuts (22) on mount (20) and crossmember (25).

7.

Install mount (20) and crossmember (25) on transmission adapter (15) with two lockwashers (24)

and capscrews (23). Tighten capscrews (23) to 65 lb-R (88 N-m).

8.

Install stud (111, nut (12), washer (13), cable (14), washer (131, and nut (12) on support bracket (10).

Secure crossmember (25) on stud (11) with washer (27) and locknut (26).

9.

Install bypass valve (16) and crossmember (25) on support bracket (19) with washer (181, capscrew (171,

washer (181, and locknut (21). Tighten locknut (21) to 65 lb-ft (88 Nom).

10.

Tighten two nuts (22) to 65 lb-f%

(88 Nom).