TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 752 of 1555

TM 9-2320-387-24-2

1 19-4. TRANSMISSION/TRANSFER

CASE ASSEMBLY INSTALLATION (Cont’dl

I

21.

Connect two hoses (17) to transmission/transfer case cooler lines (19) and tighten hose clamps (181.

22.

Install shift rod and trunnion (231 on relay lever (221 with washer (21) and cotter pin (20).

23.

Lower rear of vehicle (para. 8-2).

FOLLOW-ON TASKS:

l

Install front propeller shaft (para. 6-2).

l

Install muffler support bracket (para. 3-55).

l

Install sealed upper converter housing cover (para. 5-12).

l

Install transmission oil dipstick (para. 5-5).

l

Install rear propeller shaft (para. 6-4).

l

Install engine access cover (para. 10-22).

l

Fill transmission to proper fluid level (TM 9-2320-387-10).

l

Start engine (TM 9-2320-387-10) and inspect for leaks.

l

Road-test vehicle (para. 5-141 and check for proper transmission/transfer

case operation.

19-13