TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 838 of 1555

TM 9-2320-387-24-2

24-21.

REAR CROSSMEMBER BRACKET AND REAR BODY MOUNT BRACKET

REPLACEMENT

This task covers:

a.

Removal

b.

Installation

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Four locknuts (Appendix G, Item 121)

Equipment

Condition

Rear body mount removed (para. 33-3).

Maintenance

Level

Direct

support

Manual References

TM 9-2320-387-24P

1

a. Removal

1

.

1.

Remove

four locknuts (11, washers (2), rear body mount bracket (31, and plate (4) from frame rail (5).

Discard locknuts (1).

2.

Remove four capscrews (81, washers (2), crossmember bracket (71, and plate (6) from frame rail (5).

b. Installation

1.

Install

plate (6) and crossmember

bracket

(7) on frame

rail (5) with four washers

(2) and

capscrews (8).

2.

Install plate (41 and rear body mount bracket (3) on frame rail (5) with four washers (2) and

locknuts

(

1).

3.

Install rear body mount (para. 33-3).

4.

Tighten locknuts (1) to 90 lb-R (122 Nom).

24-38