TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 840 of 1555

TM

9-2320-387-24-2

24-22. - REAR BUMPER MOUNTING BRACKET AND ,TlEDOWN BRACKET REPLACEMENT

This task covers:

a. Removal

h. Installation

INITIAL SETUP:

Tools

General mechanic’s

tool

kit:

automotive (Appendix B, Item 1)

Materials/Parts

Eight locknuts (Appendix G, Item 121)

Manual References

TM 9-2320-387-24P

Equipment Condition

l

Rear

body mount removed (para. 33-3).

l

Tiedown ring removed (para. 9-4).

Maintenance Level

Direct support

1

a. Removal

1

1.

Remove four locknuts (91, washers (61, capscrews (5), and washers (6) from bumper mounting

bracket (7) and bumper (4). Discard locknuts (9).

2.

Remove four locknuts (81, washers (2), capscrews (31, washers (21, and bumper mounting bracket (7)

from frame rail (1). Discard locknuts (8).

b. Installation

1.

Install bumper mounting bracket (7) on frame rail (1) with four washers (21, capscrews (31,

washers (2), and locknuts (8).

2.

Install bumper mounting bracket (7) on bumper (4) with four washers (61, capscrews (5),

washers (61, and locknuts (9).

3.

Tighten locknuts (8) and (9) to 90 lb-ft (122 N-m).

FOLLOW-ON TASKS:

l

Install rear body mount (para. 33-3).

l

Install tiedown ring (para. 9-4).

24-40