TM-9-2320-428-10

TRUCK, CARGO, 8X8, M977

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-428-10 - Page 983 of 1072

OPERATOR MAINTENANCE

CHANGE WHEEL AND TIRE ASSEMBLY

INITIAL SETUP:

Tools and Special Tools

Chocks, Wheel (2) (WP 0162, Table 3,

Item 8)

Extension, Handle (WP 0162, Table 3,

Item 12)

Handle, Wrench (WP 0162, Table 3,

Item 13)

Jack, 12-ton, With Handle (WP 0162,

Table 3, Item 16)

Jack, Base Plate (WP 0162, Table 3,

Item 19)

Tools and Special Tools - Continued

Warning Device Set, Triangular

(WP 0162, Table 3, Item 21)

Wrench, Wheel Lugnut (WP 0162,

Table 3, Item 32)

Wrench, Adjustable (WP 0162,

Table 3, Item 30)

Personnel Required

Operator and Assistant - - - (2)

PREPARE VEHICLE

1.

Shut off engine. (WP 0057)

WARNING

Park vehicle in safe area, out of traffic, where there is no danger to

personnel changing tire assembly. Park vehicle on hard level ground.

Failure to comply may result in injury or death to personnel.

2.

Turn on emergency flashers. (WP 0076)

3.

Set up emergency marker kit, as necessary. (WP 0099)

END OF TASK

SET UP TIRE DAVIT WINCH

1.

Remove hoist arm (1) from mounting bracket (2).

TM 9-2320-428-10

0155

0155-1